Rapid Rate Thermal Cycle Chamber

RIUKAI TECHNOLOGY has 25+ years of experience in the field of environmental testing equipment testing to meet the needs of our customers.

The Rapid-Rate Thermal Cycle Chamber is ideal for test requiring quick changes 15°C/min ramp rate in specimen temperature and 23°C/min ramp rate for air temperature(temperature heat up average). It covers various applications from JEDEC, IEC standards to screening.
Standard humidity chambers are available with temperature ranges 0°C to 150°C, -20°C to 150°C and -40°C to 150°C, -60°C to 150°C and -70°C to 150°C with humidity range from 20% to 95% RH.
Rapid-rate Thermal Cycle Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
The rapid temperature change test chamber, also known as the temperature (humidity) rapid change test chamber, is suitable for the safety performance testing of electronic components under rapid temperature change conditions. It provides reliability tests, product screening tests, etc
Rapid-rate Thermal Cycle Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
The Rapid-Rate Thermal Cycle Chamber is ideal for test requiring quick changes 15°C/min ramp rate in specimen temperature and 23°C/min ramp rate for air temperature(temperature heat up average). It covers various applications from JEDEC, IEC standards to screening.

Rapid Rate Thermal Cycle Chamber

Product Model: RK-KTHX Series,100L~1000L

Main Parameters:

  • Temperature range: -80℃ ~ 150 ℃ other temperature can be customized
  • Ramp rate:3℃/min, 5℃/min, 8℃/min, 10℃/min, 15℃/min (linear or non-linear),customization is available.

    Get A Quote

    What is Rapid Rate Thermal Cycle Chamber?

    Rapid Rate Thermal Cycle Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.

    Description of Rapid Rate Thermal Cycle Chamber

    Rapid Rate Thermal Cycle Chamber is used to test the performance indexes of products under rapid temperature changes in aerospace products, information electronic instruments, chips, semiconductors, new materials, electricians, electronic products, and various electronic components.

    Features of Rapid Rate Thermal Cycle Chamber:

    • 5℃/min, 10℃/min, 15℃/min, 20℃/min temperature change rate. It can be selected for faster conversion rates.
    • It covers various applications from JEDEC and IEC standards to screening.
    • High-temperature rate of change with uniformity and reproducibility
    • Environmentally friendly servo refrigerant flow control, energy saving, fast heating up/cooling down.
    • Independent thermal protectors and sensors keep test specimens from getting too hot、windless and smoky.
    • Patent: self-developed humidity chamber structure without condensation (ESC series)
    Model
    RK-KTHX-100
    RK-KTHX-150
    RK-KTHX-225
    RK-KTHX-408
    RK-KTHX-1000
    Interior size (cm)WxHxD
    40×50×50
    50×60×50
    50×75×60
    60×85×80
    100×100×100
    Exterior size(cm)WxHxD
    62×149×127
    72×159×127
    72×175×137
    82×185×157
    122×200×177
    Temp. range
    -80℃ ~ 150 ℃ other temperature can be customized
    Cooling/Heating time
    3℃/min, 5℃/min, 8℃/min, 10℃/min, 15℃/min (linear or non-linear),customization is available.
    Temp. fluctuation
    ± 0.3 ℃ (no-load)
    Temp./Humidity deviation
    ≤ 2.0 ℃ / ± 3.0%RH (no-load )
    Temp./Humidity uniformity
    ± 2 ℃/ ± 2.0%RH  (no-load)
    Humidity range
    10%R.H ~ 98%R.H (Customizable to 0% humidity or humidity at below zero temp.)
    Interior material
    SUS304 stainless steel (SUS316 stainless steel can be customized)
    Exterior chamber material
    Cold rolled plate + Powder coating
    Insulation material
    PU+ fiberglass wool
    Refrigeration system
    Double and overlapping refrigeration system + Piston compressor + Environment-friendly refrigerant R-404A /R-23
    Controller
    Touch screen controller+SSR+PID
    Safety protection device
    No fuse switch / Heater over current protection / Fan overload protection /Compressor overpressure protection
    Other components

    1.Multi-layer vacuum glass observation window

    2.Cable port(50 mm), for cable routing
    3.Controlling status indicator lamp
    4.View light * 1
    5.Loading shelf( 2 pcs, position adjustable)
    Power supply
    AC3 380V 50Hz Power supply can be customized

    ANYTHING YOU COULDN’T FIND?

    Talk with our sales

    Riukai is a set of simulated natural environment reliability test equipment design, research anddevelopment, production and sales and service of national high-tech enterprises, research institutes tocooperate in the production and research units, the domestic reliability of environmental testing equipmentindustry pioneer enterprises.

    • OEM.
    • No MOQ.
    • One-year quality assurance.
    • Unbeatable prices.
    • Comprehensive brochure you can download.
    • Fast Respond Or enthusiasm.
    • Fast delivery.
    • Excellent R&D and innovation capability.

    SEND US AN EMAIL

    export@riukai.com

    Contact Us

    Talk to our sales staff to understand your needs.